How to maintain SANY excavators?

Abrasion, corrosion and aging are three main factors that make the excavator machine parts invalid. Among the three, abrasion is the one that causes most damages to the machine parts. To minimize the machine abrasion, we can find solutions from the source, such as using the best material.

Abrasion, corrosion and aging are three main factors that make the excavator machine parts invalid. Among the three, abrasion is the one that causes most damages to the machine parts. To minimize the machine abrasion, we can find solutions from the source, such as using the best material, choosing advanced manufacturing techniques and designing reasonable mechanical structure, what is more important is making good lubrication. It is reported that half of the construction machine malfunction is caused by poor lubrication. Based on the compactness and precision in the connection of all the parts, good lubrication can create a natural working gap and applicable temperature for the parts, thus minimizing the abrasion rate and reducing machine downtime. How to make good lubrication? The first step is to choose the right lubricant. Generally, the lubricant should be chosen according to the machine category, application structure and the working environment. The second step is to regularly check the quality and quantity of the lubricant to keep it in valid and efficient status.    

Impurities may be generated during the machine working process, which will cause great damage to the excavator machine parts. The impurities entering the machine will damage the lubricating oil film and increase abrasion to the parts. It is reported that when the impurities increase 0.15%, the abrasion rate will be 2.5 times the normal value. Therefore, it is very important to make good lubrication for the machine, especially when it is working in the complicated environment. Rain and air pollution can cause corrosion to the machine, which will also increase abrasion, so measures should be taken in advance to protect the machine from water or air pollution.

Each part of the machine has its own working temperature range. Such as, the coolant temperature should be 80-90℃ while the hydraulic oil temperature should be 30-60℃. The temperature that is lower or higher than the normal range will make the lubricating oil metamorphic and increase abrasion to the machine. What is more, the excavator machine should be set in idle running for several minutes with low speed before starting to work. Avoid operating the machine in too low or too high temperature with overload.

 

 

Share :

Contact Us

Contact Us

Overseas Service Hotline

Tel : 0086-10-69739318
Global Sales Hotline
Tel : 0086-731-85835199
Time : Mon–Fri 8:00 AM -17:30 PM (We will contact you within 24 hours)

INQUIRY

HOT SALE

Operating Weight
36000kg
Engine Model
Isuzu 6HK1-XDHAG-01-C3
Rated Power
212/2000kW/rpm
Std.Bucket
1.6m3
Operating Weight
1820kg
Engine Model
Yanmar 3TNV74F
Engine Power
11.2/2400kW/rpm
Standard Bucket
0.04m³
Operating Weight
76200kg kg
Engine Model
Isuzu BB-6WG1XQA-03
Rated Power
377/1800 kW/rpm
Maximum Digging Height
11062mm
Operating Weight
3860kg
Engine Model
Yanmar 3TNV88F-ESSY
Rated Power
18.2/2200kW/rpm
Std.Bucket
0.12m³
亚洲国产在线视频精品_AV精品国产_丁香五月亚洲综合在线